SONY VTC4 18650 2100mAh Battery - 30A

High Amps discharge current, great for mech mods and sub-ohm builds

Sold Individually

Manufacturer's Specs:

Dimensions: 65.0mm (L) x 18.2mm (D)

Weight: 45g

Typical Capacity: 2100mAh

Min Capacity: 2000mAh

Max Continuous Discharging Current: 30A

Discharge cut-off voltage: 2.5V

Voltage: 3.7V

Full Charge Voltage: 4.2V

Safe chemistry LiMN means reduced risk of venting with flame or explosion. Due to the safety inherent in IMR safe chemistry batteries there is no protection circuitry added or built in. This provides a slightly shorter battery length to enable a good fit in most mods.

To ensure longevity, it is not recommended to allow the battery to discharge below 2.5V.

Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.

PLEASE BE CAREFUL AND BUY AT YOUR OWN RISK, ALL BATTERIES COULD POTENTIALLY BE DANGEROUS. PLEASE DO RESEARCH AND BE SAFE, USE IN A MECH COULD RESULT IN PHYSICAL HARM OR DAMAGE TO ONE SELF OR PROPERTY IF DONE IMPROPERLY. WHOLE ECIGS MARKET ACCEPTS NO RESPONSIBILITY FOR THE OUTCOME OF USING IMR BATTERIES. BUY AT YOUR OWN RISK.